NeutronRC AT32F435 Mini AIO 1-2S


An insane 1-2S AIO FC packed with cutting edge features

Out of stock

Categories: , , SKU: NeutronRC AT32F435 Mini AIO 1-2S



  • An insane 1-2S AIO FC packed with cutting-edge features
  • AT32F435 MCU; faster than than F722
  • 32bits 12A ESC; the first 1S 32bits ESC
  • Onboard Serial ELRS 2.4G; No more SPI, flash ELRS directly from mainline
  • Onboard 16mb flash memory for blackbox
  • A dedicated 12V 2A rail for HD Vtx and Dji plug included
  • 5 full uarts broken out
  • Did I mention it even has a barometer?!



MCU: AT32F435CGU7, @288M Hz,1MB Flash
IMU: BMI270 (SPI1) CW=0,YAW = -45
OSD: AT7456E (SPI2)
Blackbox: SPI=2 Flash 16M
Baro: Infineon DPS310(I2C1)
5x Uarts (1,2,3,5,7) & 1x I2C
BEC: 5V 2.0A,12V 2A(DJI O3)
FC FW Support: INAV/QUICKSILVER/Betaflight
ESC FW Support: HF32/AM32/ESCape32
Onboard Receiver: ELRS 2.4G (target: DIY 2400 RX ESP8285 SX1280)
Current sensor (Scale 165) & Voltage sensor (Scale 110)
4x LEDs for FC Status & 3.3V & 5V and ELRS
ESC MCU: AT32F421 120MHz (HF32 Firmware)
AOS MOSFETS, low internal resistance and high current
Current 12Ax4 ,Max 13A(5S)
8-layer 2OZ, 2-order blind via PCB.
Weight: 6.56g


For more details on specs, pinout, flashing, setup, or anything else please check out the incredibly detailed manual from Neutron RC following this link



  • 1x AIO FC
  • 1 x XT30 pigtail
  • 1x filtering capacitor
  • 1x DJI Pigtail
  • 1x 2.4g antenna
  • 4x silicone mounting grommets

Additional information

Weight 13 g
Dimensions 120 × 80 × 15 mm
BNF Flight Controller

NeutronRC AT32F435 Mini AIO 2S


There are no reviews yet.

Be the first to review “NeutronRC AT32F435 Mini AIO 1-2S”

Your email address will not be published. Required fields are marked *

Post comment